Strada Prov. Amendola, 205 - 84087 - Sarno (SA)

99.11-E Orthopedic Bed 4 Electric Sections

Description

Technical specifications

Perimeter frame: it is made of steel profile with rectangular section with rounded corners mm. 40x20x1,5, painted with epoxy powders in a 200 ° C thermal tunnel after phosphating.

Patient Plan Top: The patient’s top is made of painted 50×10 mm oval metal slats. Fixed height.

Settings:

The sections are: the backrest, with an inclination> 75 °, and the femoral, with femoral tilt> 35 °, are articulated by electric actuators controlled by BT push-button panel, fixed basin section, leg section automatically lifted with the femoral section through levers.

Shoulders: Headboard and footboard are made of painted steel tube diam. 30×1.2, with inserts made of 50×10 mm slats with bayonet connection.

Painting: with ivory-colored epoxy powders (RAL 1013) and antibacterial additive, after phosphating and firing in thermal tunnel (200 ° C, average coverage 90 micron).

External Dimensions: mm 2010x900x470h

Internal Dimensions: 1950x850mm

Safe working load: 170 kg

Maximum weight of the patient: 135 kg

Weight: 48 kg

Volume: 0.18 m³

ISO code 18.12.10.003

Register at the Ministry of Health – Medical Devices Directory n. 1534307 – CND Y181210

Specifications

Patient plan width (mm) 850

Patient plan height (mm) 470

Patient plan length (mm) 1950

Sections (mm) 660/280/430/430

Backrest angle > 75 °

Femoral angle > 35 °

Electric movements

Patient plan capacity (Kg) 135

Gross capacity (kg) 170

Product weight (Kg) 48

Mattress dimensions (cm) 193 x 84 x 14h

Accessories on request

Wheel kit diam. 100mm

Wheel kit diam. 125mm

4 section mattress

Headboard and footboard with panel

Raises ill with espalier

Raises sick with a base

Telescopic sides

Raises blankets

Folding sides

IV pole

Colors

Prodotto conforme CEE