Strada Prov. Amendola, 205 - 84087 - Sarno (SA)

99.01 Orthopedic Bed 2 Sections 1 Crank


Technical specifications

Perimeter frame: it is made of steel profile with rectangular section with rounded corners mm. 40x20x1,5.

Patient Plan Top: The patient’s top is made of 50×10 mm oval metal slats. Fixed height.

Adjustments: There are two sections: the backrest, with an inclination> 75 °, is articulated by means of a joint with manual adjustment by means of a screw push and a revolving rotating crank, with a fixed pelvis / leg section.

Shoulders: Headboard and footboard are made of steel tube diam. mm. 30×1.2, with inserts made of 50×10 mm slats with bayonet connection.

Painting: with ivory-colored epoxy powders (RAL 1013) and antibacterial additive, after phosphating and firing in thermal tunnel (200 ° C, average coverage 90 micron).

External Dimensions: mm 2010x900x470h

Internal Dimensions: 1950×850 mm

Safe working load: 170 kg

Maximum weight of the patient: 135 kg

Weight: 48 kg

Volume: 0.18 m³ – Complete with instruction manual

ISO code

Register at the Ministry of Health – Medical Devices Directory n. 1534315- CND Y181207


Patient plan width (mm) 850

Patient plan height (mm) 470

Patient plan length (mm) 1950

Sections (mm) 660/1270

Backrest angle > 75 °

Movement with crank

Patient plan capacity (Kg) 135

Gross capacity (kg) 170

Product weight (Kg) 32

Mattress dimensions (cm) 193 x 84 x 14h

Accessories on request

Wheel kit diam. 100mm

Wheel kit diam. 125mm

2-section mattress

Headboard and footboard with panel

Raises ill with espalier

Raises sick with a base

Telescopic sides

Raises blankets

Folding sides

IV pole


Prodotto conforme CEE